We use cookies to make your experience better. Learn more.
Metal Detector
GO-FIND 11
₹14,652.00
In stock
SKU
3231-0022
FEATURES
COMPACT & PORTABLE
ULTRA LIGHTWEIGHT
SIMPLE DISPLAY
OVERVIEW
PERFECT FOR NOVICES.
GO-FIND 11
GO-FIND 11 is the perfect introduction into the world of metal detecting.
With powerful technology, extreme portability and easy operation, it's about getting the whole family involved.
SEARCH MODES
Select the targets you want to recover by pressing which icons you want to remain on the screen.
Go-Find 11 has 2 search modes: All Metals and Reject Iron. That is, you can accept or reject iron targets, the first icon, avoiding digging up more common trash targets on the beach, without missing high valued targets
1 Battery Level
2 Power Switch ON/OFF
3 Earbuds Connector
4 Sensitivity Adjustment
5 Find Icons (x4)
6 Find Mode
7 Volume Adjustment
THE GO-FIND APP
Know treasure from trash.
GO-FIND’s Treasure View feature lights up to tell you what’s trash or treasure down there. Get red LEDs, you’ve most likely found a nail or a key. Get green LEDs and you’ve found coins or jewelry. Dig away.
- Identify common coins
- View detector information & remote control the detector*
- Listen to music and detect at the same time
- Record your finds on Google Maps*
- Customise detector and App tones.
1 Loudspeaker
2 Power Switch
3 Earbuds Connector
4 Handle unlock button
5 Control Panel
6 Armrest
COMPACT & PORTABLE
No assembly required. The entire detector collapses down and conveniently fits into luggage or backpacks
ULTRA LIGHTWEIGHT
At just 2.2 lbs. GO-FIND 11 provides instant excitement for every camping trip or outdoor adventure.
EASY TO USE
Large intuitive icons convey battery life, signal strength and type of items being detected.
TECHNICAL SPECIFICATIONS
PORTABILITY
Collapsible
FIND MODES
2
SEARCH COVERAGE
Regular (8-inch coil)
TREASURE VIEW LEDS
NO
TARGET DEPTH INDICATION
NO
AUDIO
1 Tone
BACKLIGHT
NO
SENSITIVITY
3 levels
VOLUME ADJUST
3 levels
TARGET PINPOINT
NO
BLUETOOTH
NO
SMARTPHONE APP
NO
SMARTPHONE HOLDER
NO
TARGET ID'S
4 IDS per the find icons
HEADPHONE JACK
3.5mm (1/8”)
EARBUDS CONNECTOR
NO
BATTERIES
4xAA (not included)
WATERPROOF COIL
Yes
WEIGHT
2.2 lbs ( 1 kg )
LENGTH
Collapsed 21.9 in. ( 556 mm ) Extended 51.4 in. ( 1305 mm )
PACKAGE CONTENT
Go-find 11 Detector.
WARRANTY
2 years (24 months) from the Date of Purchase.
FAQ
Can I change the detection coil?
No, the detection coil that is included with your GO-FIND detector is designed to provide the best performance for that specific model and cannot be changed.
Can go-find operate with rechargeable batteries?
Yes, the GO-FIND series can operate with rechargeable 1.2volt Ni-MH rechargeable batteries. You can only use batteries that have a 1.2 volt or 1.5volt rating. Most AA Lithium batteries have a higher voltage and cannot be used as they exceed the maximum voltage rating for the detector. Using Lithium batteries that exceed the maximum voltage rating can damage the internal electronics of the detector. This type of damage is not covered under warranty.
Can I wash my detector?
The detection coil on the GO-FIND series is waterproof to 60cm (2ft) and can be washed. The screen pod should never be washed or submerged in water as it is not waterproof. To clean the screen pod wipe it with a damp cloth.
You should never use any chemicals when cleaning your detector as some chemicals can damage the plastics. You can read a more in-depth article regarding Minelab products and chemicals by clicking on the below product notice link.
https://www.minelab.com/support/product-notices?article=516513
How Can I change the batteries?
The battery compartment is in the handle of the GO-FIND. On the rear of the handle, you will see a small tab. Gently pull this tab down and then lift the battery compartment lid to access the batteries.
IS THERE A GROUND BALANCE FEATURE?
Yes, the GO-FIND detectors utilise Minelab’s Easy-Trak ground balance technology which automatically senses salt mineralisation in the ground and adjusts the detector to ensure constant smooth usage when detecting in beaches or parks.
CAN I USE WIRELESS HEADPHONES?
Wireless headphones can be used but they cannot be paired directly to your detector. You will need to connect your wireless headphones to your smartphone and then connect your GO-FIND 44 or 66 to your smartphone via the GO-FIND app. GO-FIND 11 or 22 do not have Bluetooth capability and cannot connect to the GO-FIND app or wireless headphones.